Newly Arrival Bottle Refill Solvent Ink - A3 A4 Dark/Light Heat Transfer Paper for Cotton Fabric Sublimation Printing – AoBoZi

Special coated paper to print your own designs or high quality photo image onto light and dark colored T-shirts, or any other cotton based fabric. Your image can even be printed at high resolution. After printing, easily transfer the image with the use of a household iron onto the fabric. And the transferred designs or photo images are washable. 

Features

1) High quality ink receiver layer
2) Good ink control and absorption, no cockle
3) Suitable only for user with inkjet printer
4) Also we produce Inkjet photo paper and film
5) 1,440 – 5,760dpi
6) Ink is accepted in the precise area required and no further
7) Good line-sharpness and image quality
8) Water-proof
9) Instant dry
10) Suitable for use with dye and pigment inks
11) Suitable for thermal and piezo technology
12) Compatible with most inkjet printers

How to Use?

1. Print image: Take Epson inkjet printer and classic dark transfer paper as examples. Set the picture before printing: select[Photo] or [Quality Photo] in the main window; [Mirror] is not required.
2. Release backing paper: peel off the printed inkjet dark transfer paper from one corner to separate the printing surface from the backing paper, so that the pattern can be transferred to the fabric.
3. Transfer: Place the cloth or clothes on the heating platen, then put the separated inkjet dark paper with the pattern facing up,cover the isolation paper, press down the machine, wait until the time is over and lift up the handle, remove the release paper, and the beautiful image is presented in front of you! (Transfer time and temperature should be adjusted according to different heat press machines).
4. Glitter dark transfer paper: The pressure of the heat press machine is smaller, the temperature is 165 ℃ (160 ℃ -170 ℃), time is 15-20 seconds.After the printed pattern is dry, it can be directly transferred; it can also be covered by a special positioning film by hand or with a cold laminator, and then transferred after engraving. The pattern is more three-dimensional, and the positioning film is warm and cold torn after transfer.
5. Washing and maintenance: Washing can be done after printing for 24 hours, and can be washed by hand or machine. Do not use bleach when washing. Do not soak. Do not dry. Do not rub the pattern directly.